DIVAL 500 MP regulator 

RG730.50
Dival 500 MP regulator, inlet pressure 0.8 - 5 Bar, outlet pressure 0.3 Bar. FxF 1” fittings. With vent valve
The DIVAL 500 pressure regulators are spring loaded, diaphragm controlled, direct action regulators with a balanced plug, suitable for low, medium and high pressures. DIVAL regulators are factory-supplied to function with the internal sensing line only, both the regulator and the shut-off device. Both the regulator and the shut-off device are pre-set for connection to an external sensing line (by client). They are widely used in both civil and industrial installations for Natural Gas, LPG and other non-corrosive gases. Thanks to the balanced plug these regulators offer a high flow rate coefficient, high accuracy, even at maximum flow rates, relatively reduced lock up pressure zone and lock up pressure, reduced response times. Periodic maintenance can be done without disassembling the body from the pipework, built-in shut-off device option, (LA model only) also on regulators that have already been installed without modifying the existing piping. Available sizes DN 1" - 1" ½, Design temperature -20°C +60°C.

Marking and References to Standards for Degree of Protection:
EC homologation in accordance with EN 88-2 Compliant with Directive 2009/142/EC (Gas Directive) Compliant with Directive 97/23/EC (PED) Compliant with Directive 94/9/EC (ATEX Directive)

Material
The DIVAL 500 pressure regulators are spring loaded, diaphragm controlled, direct action regulators with a balanced plug, suitable for low, medium and high pressures. DIVAL regulators are factory-supplied to function with the internal sensing line only, both the regulator and the shut-off device. Both the regulator and the shut-off device are pre-set for connection to an external sensing line (by client). They are widely used in both civil and industrial installations for Natural Gas, LPG and other non-corrosive gases. Thanks to the balanced plug these regulators offer a high flow rate coefficient, high accuracy, even at maximum flow rates, relatively reduced lock up pressure zone and lock up pressure, reduced response times. Periodic maintenance can be done without disassembling the body from the pipework, built-in shut-off device option, (LA model only) also on regulators that have already been installed without modifying the existing piping. Available sizes DN 1" - 1" ½, Design temperature -20°C +60°C.
Marking and References to Standards for Degree of Protection
See description
Material
See description
Fluids
Natural gas, manufactured gas and LPG
Application category
Adjustment
Conn.IN
F1” thread
Conn.OUT
F1” thread
Temperature
-20° +60°C
Pressione IN (Bar)
0,8÷5
Pressione OUT (Bar)
0,3
50 Items

form footer

Product added to compare.